Gage Bilt GB703VT 설치 매뉴얼 - 페이지 10

{카테고리_이름} Gage Bilt GB703VT에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB703VT 15 페이지.

HEAD

WARNING:

Dispose of hydraulic oil in accordance with applicable regulations.

Remove nose assembly and adapter from tool before attempting disassembly of head assy.

Remove end cap (703114). Push against threaded end of piston (703607) to slide it out of head cylinder assy (703109). Be careful not

to damage threads or cause burrs on polished piston rod assy (704138) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque

the button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

S/N: 3157 AND ABOVE

9/14

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.