Gage Bilt GB703VT Посібник з монтажу - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з монтажу для Інструменти Gage Bilt GB703VT. Gage Bilt GB703VT 15 сторінок.
Друкувати сторінку
HEAD
WARNING:
Dispose of hydraulic oil in accordance with applicable regulations.
Remove nose assembly and adapter from tool before attempting disassembly of head assy.
Remove end cap (703114). Push against threaded end of piston (703607) to slide it out of head cylinder assy (703109). Be careful not
to damage threads or cause burrs on polished piston rod assy (704138) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque
the button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
S/N: 3157 AND ABOVE
10
9/14
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.