Dyna-Glo DELUX LPFA43DGD-01 사용 설명서 및 작동 지침 - 페이지 6

{카테고리_이름} Dyna-Glo DELUX LPFA43DGD-01에 대한 사용 설명서 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dyna-Glo DELUX LPFA43DGD-01 16 페이지. Propane construction heater

1. Remove heater from carton.

2. Remove all protective packing applied to heater for shipment.

3. Retain cartons and packaging material until unit is operated and found in good condition.

4. Check heater for any shipping damage. If heater shows any external or internal

damage, promptly inform dealer/distributor where you purchased heater.

Assembly Components and Instructions for Steel Base Units:

Tools required for assembly:

All Models: Adjustable Wrench

Regulator and Hose Connection:

See figure on right.

Connect the hose tightly to

the heater using a wrench.

Please also refer to

page 7 in the manual.

PROPANE CONSTRUCTION HEATER

UNPACKING HEATER

Contents:

All Models: Unit, Manual, Hose and Regulator

Assembly

Tighten, clockwise,

use a wrench

Assembly Time:

5 Minutes

Hose Assembly

NEVER LEAVE THE HEATER

UNATTENDED WHILE BURNING!