Dyna-Glo DELUX LPFA43DGD-01 Podręcznik użytkownika i instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika i instrukcja obsługi dla Grzałka Dyna-Glo DELUX LPFA43DGD-01. Dyna-Glo DELUX LPFA43DGD-01 16 stron. Propane construction heater
Drukuj stronę
1. Remove heater from carton.
2. Remove all protective packing applied to heater for shipment.
3. Retain cartons and packaging material until unit is operated and found in good condition.
4. Check heater for any shipping damage. If heater shows any external or internal
damage, promptly inform dealer/distributor where you purchased heater.
Assembly Components and Instructions for Steel Base Units:
Tools required for assembly:
All Models: Adjustable Wrench
Regulator and Hose Connection:
See figure on right.
Connect the hose tightly to
the heater using a wrench.
Please also refer to
page 7 in the manual.
5
PROPANE CONSTRUCTION HEATER
UNPACKING HEATER
Contents:
All Models: Unit, Manual, Hose and Regulator
Assembly
Tighten, clockwise,
use a wrench
Assembly Time:
5 Minutes
Hose Assembly
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!