Dawn AAMT602135-01 설치 매뉴얼 - 페이지 3

{카테고리_이름} Dawn AAMT602135-01에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dawn AAMT602135-01 6 페이지. Vanity

Safety Glasses, Pencil, Level, Tape Measure, Stud Finder, Assorted Screwdrivers, Assorted Wrenches,

Comply with Plumbing Codes

●

Before installing any Dawn product in your new or remodeled kitchen, you should make sure that you are in compliance with all

local plumbing codes.

Check Product Condi on

●

Before installa on, please check the condi on of the product and, if appropriate, its components. If there is any problem with

the product and/or its components, please contact the store you purchased it from for a replacement. As soon as you have in-

spected your product, please return it to its original packaging un l you are ready to install it.

Handle with Care

●

To protect its ﬁnish and avoid damage before and a er installa on, please handle the product with care. For care and cleaning

ps a er installa on, please refer to the Care and Cleaning Guide in this instruc on guide.

To ease installa on, remove drawers from the vanity before beginning.

Removal

●

Reinstalla on

●

MATERIALS & TOOLS

Drill, Screw Gun, Caulking Gun, Hammer, Screws, Nail Anchors/Molly Screws

BEFORE YOU BEGIN

REMOVE & REINSTALL THE DRAWER

Fully extend the rails. Align the holes on the underside of

the drawer with the rails and set into place.

From underneath the rails, screw back the moun ng screws.

Lightly li the front of the drawer to ensure the drawer is

locked into place. Slide the drawer in and out of the cabinet

to ensure smooth opera on.

Pull the drawer out un l it stops. From un-

derneath the rails, loosen and remove the

moun ng screws.

Li the front of the drawer and pull the

drawer away from the cabinet.

INSTALLATION GUIDE AAMS-6001