Dawn AAMT602135-01 설치 매뉴얼 - 페이지 5
{카테고리_이름} Dawn AAMT602135-01에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dawn AAMT602135-01 6 페이지. Vanity
페이지 인쇄
Dawn® Vanity Cabinets
Wood naturally darkens over me or changes slightly in color due to light exposure and may go unno ced from day to day. Howev-
er, over an extended period of me it may become more no ceable, depending on the amount of sunlight exposure. Our warranty
replacement products are not guaranteed to have an exact match. Any imperfec ons such as small surface splits, small dark pits or
dark mineral streaks are natural and will not be considered as defects.
Do regular rou ne cleaning rather than an occasional aggressive single cleaning.
●
Dust frequently with a so cloth and occasionally use a wood cleaner that is not silicone based.
●
Do not place in direct sunlight or near windows with direct sunlight exposure.
●
Avoid extreme temperature changes and keep away from heater and air condi oning units.
●
Do not allow liquids to remain on the wood surfaces for longer than necessary.
●
Liquid absorp on will cause wood to warp, bubble, and crack, and your finish may peel.
●
Dawn® Glass Sinks
Dawn® glass sinks are manufactured to our highest possible standards and regula ons to ensure you receive the utmost quality.
Dawn® tempered glass sinks are made to last because the tempering process makes them stronger than annealed glass. That does
not mean they are indestruc ble, but rather more durable and prac cal for everyday use. We have a few recommenda ons to
make your sink last and maintain its sheen. Glass is subject to thermal stress when it experiences extreme hot or cold condi ons
suddenly. Glass needs me to be heated or cooled to extreme temperatures, and sudden changes can cause stress cracks to the
product.
Clean regularly with hot water and a mild detergent solu on applied with a so cloth or sponge to remove deposits.
●
Rinse thoroughly and towel dry a er every use to prevent water spots and mineral deposits.
●
Drying your sink a erwards will help prevent water spots.
●
Rain-X®, which is available at most automo ve departments can be applied to keep your Dawn® sink water spot free.
●
Dawn® Ceramic Sinks
To keep your Dawn® products the center of a en on, we suggest you follow these guidelines to maintain its quality and beau ful
aesthe cs. Deep clean once a week with an approved cleanser and a so cloth or sponge rather than an occasional aggressive sin-
gle cleaning.
Water quality can also affect your Dawn® sink making it appear dull or stained. Lime scale is notorious for absorbing liquids like
coffee, tea, and wine making the stained or nged look. To remove lime scale build up on your Dawn ® sink, use a lime scale clean-
ing agent, such as CLR®. You can also soak the sink in 1 part white vinegar and 3 parts water to help loosen problema c areas mak-
ing it much easier to sponge away debris. Make sure to use a non-abrasive pad/sponge with a ceramic cleaner.
Do's and Don'ts
Clean regularly with hot water and a mild detergent solu on applied with a so cloth or sponge to remove deposits.
●
Rinse thoroughly and towel dry a er every use to prevent water spots and mineral deposits.
●
Drying your sink a er each use will help prevent water spots and lime scale.
●
To remove lime scale or water spots, only use cleaners made specifically for that purpose. Apply cleaners to cleaning cloths,
●
pads, or sponges first, and test in a small area; do not apply directly onto the product.
Do not allow any cleaning product to remain on your sink longer than necessary.
●
Do not leave rubber patches, wet sponges, cloths, cleaning pads, or dishpans in the sink.
●
Do not use coarse abrasive powders and metallic scourers, such as steel wool or brushes with metal bristles.
●
Do not allow liquid soap or other cleansers to dry on the surface of the sink.
●
Do not use detergents or soaps that contain acid or that are not dissolvable.
●
CARE AND CLEANING
5