Gage Bilt GB704 원본 사용 설명서 - 페이지 4

{카테고리_이름} Gage Bilt GB704에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB704 20 페이지. Installation tool
Gage Bilt GB704에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지), 매뉴얼 (14 페이지)

페이지 인쇄

WARNING:

Any other use is forbidden.

The GB704 is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind rivets. It weighs 4.30 lbs. (1.95kg)

and can be operated in any position. It has a .540" (13.72mm) fastener setting stroke and a rated pull load of 3,300 lbs. (14.68 kN) with 90

psi. (6.2 bar) air pressure at the air inlet.

The GB704 installation tool is designed to operate on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi (6.2 bar) air pressure providing

the maximum efficiency. At 90 psi (6.2 bar) air pressure, the GB704 does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).

The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart

on page 18 for nose assembly recommendations).

WARNING:

Do not operate in an explosive atmosphere.

The GB704 can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)

GB704 S/N: 3213 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Hand Held Weight

- 4.30 lbs. (1.95 kg)

Air pressure req'd

- 90-100 p.s.i. (6.2-6.9 bar) Max.

Air consumption

- .16 SCF/cycle (4.53 L/cycle).

Hydraulic Oil

- Automatic Transmission Oil,

Setting stroke

- .540" (13.72 mm)

Rated pull load

- 3,300 lbs. (14.68 kN)

Noise level

- 81.5 dB(A)

Vibration

- Tested– No hazards found.

Dexron® III, or equivalent.

6/11 Rev. 5/22