Gage Bilt GB704 Oryginalna instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Oryginalna instrukcja obsługi dla Narzędzia do nitów Gage Bilt GB704. Gage Bilt GB704 20 stron. Installation tool
Również dla Gage Bilt GB704: Instrukcja instalacji (13 strony), Podręcznik (14 strony)
Drukuj stronę
WARNING:
Any other use is forbidden.
The GB704 is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind rivets. It weighs 4.30 lbs. (1.95kg)
and can be operated in any position. It has a .540" (13.72mm) fastener setting stroke and a rated pull load of 3,300 lbs. (14.68 kN) with 90
psi. (6.2 bar) air pressure at the air inlet.
The GB704 installation tool is designed to operate on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi (6.2 bar) air pressure providing
the maximum efficiency. At 90 psi (6.2 bar) air pressure, the GB704 does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on page 18 for nose assembly recommendations).
WARNING:
Do not operate in an explosive atmosphere.
The GB704 can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GB704 S/N: 3213 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
- 4.30 lbs. (1.95 kg)
Air pressure req'd
- 90-100 p.s.i. (6.2-6.9 bar) Max.
Air consumption
- .16 SCF/cycle (4.53 L/cycle).
Hydraulic Oil
- Automatic Transmission Oil,
Setting stroke
- .540" (13.72 mm)
Rated pull load
- 3,300 lbs. (14.68 kN)
Noise level
- 81.5 dB(A)
Vibration
- Tested– No hazards found.
Dexron® III, or equivalent.
4
6/11 Rev. 5/22