HI tecnologia P7C 연결 매뉴얼 - 페이지 4

{카테고리_이름} HI tecnologia P7C에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HI tecnologia P7C 8 페이지.

User Manual - P7C Controller

Humidity

Rack weight

Box

Protection Degree

Dimensions

Maximum number

Racks connection

The expansion racks must be connected to the right side of the main rack. In the case of adding

one expansion rack, it is necessary to remove the screw place at the main rack side (Picture A), and

loosen the two screws placed on the rack back side, in order to fit the (red) locks, as shown on the

picture (Picture B) and there the connection will be made. For that, approach both racks, in order

to fit the locks and connectors

shows.

IMPORTANT: Note the perfect racks connection: they must be aligned after the correct con-

nection. The incorrect connection may result in bad performance or damages to the product.

1 - Check the Notes and Acronysms List at the beggining of this document

Ref.: PMU107001

Picture A: Screw

Version: 1.0.07

≤90% without condensation

0,5 Kg

Aluminium and Carbon Steel

IP30

110 (W) x 110 (H) x 115 (P) mm

5 expansion racks

together. Push both screws (M3x4) to fix the two locks as Picture C

Picture C: Connection

Release: 10/20/10

Picture B: Locks / Screws

Technical Specifications