Dawnway UVC100 사용자 설명서 - 페이지 5
{카테고리_이름} Dawnway UVC100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dawnway UVC100 6 페이지. Uv-c led disinfection faucet, sgs test-approved disinfection rate 99.9%
페이지 인쇄Troubleshooting Guide
Problem
No water or low water pressure,
the blue light is not on
water flows normally, the blue light
is not on
Red light is on
Both red and blue lights is on
Cause
Insufficient water pressure
Faucet failure
Power supply failure
Water flow switch arrow
pointing in wrong direction
Water flow switch failure
Control panel failure
UVC module overheating
Water temperature too high
UVC module failure
Remedy
Check if the water source is completely
turned on
Check if the water purifier is working
properly
Contact the local dealer or official after-
sales service personnel
Check the power supply
ensure the arrow of the water flow switch
is pointing upward (the arrow should
point towards the faucet)
Re-install
Contact the local dealer or official after-
sales service personnel
Discontinue use for one minute before
re-use
Lower water temperature
Contact the local dealer or official after-
sales service personnel
5