Great day UVRS100BL 설치 및 사용 지침 - 페이지 3

{카테고리_이름} Great day UVRS100BL에 대한 설치 및 사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Great day UVRS100BL 4 페이지. The rumble seat

FIG. 6

STEP 6: SEE FIG. 7

MARK LOCATION TO DRILL THE 4 HOLES

FOR ATTACHING THE MOUNTING

BRACKETS TO THE BED OF THE UTV.

FIG. 8

STEP 8: SEE FIG. 9

BOLT THE MOUNTING BRACKETS

TO THE BED OF THE UTV USING 4 –

5/16" X 1" OR 4 - 5/16" X 1 3/4"

BOLTS, (WHICHEVER LENGTH IS

APPROPRIATE FOR THE UTV) & 4 –

5/16" FENDER WASHERS (ON THE

UNDERSIDE OF CARGO BED), & 4 –

5/16" LOCKNUTS. TIGHTEN

SECURELY.

STEP 5: SEE FIG.6

PLACE FULLY ASSEMBLED RUMBLE SEAT

INTO THE CARGO AREA OF UTV WITH

RUMBLE SEAT BACKREST AGAINST THE CAB

OF UTV.

**NOTE**THE RUMBLE SEAT IS INTENDED TO

FACE THE REAR OF THE UTV WITH

BACKREST AS CLOSE TO THE ROLL BARS AS

POSSIBLE.

STEP 7: SEE FIG. 8

REMOVE RUMBLE SEAT & DRILL

THE 4 MARKED LOCATIONS IN THE

BED OF THE UTV USING A 7/16"

DRILL BIT. **NOTE**BE SURE YOU

ARE NOT DRILLING INTO FUEL

TANK OR FUEL LINES.

PAGE 3 OF 4

FIG. 7

FIG. 9