Great day UVRS100BL Instrukcje instalacji i użytkowania - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje instalacji i użytkowania dla Akcesoria samochodowe Great day UVRS100BL. Great day UVRS100BL 4 stron. The rumble seat

Great day UVRS100BL Instrukcje instalacji i użytkowania
FIG. 6
STEP 6: SEE FIG. 7
MARK LOCATION TO DRILL THE 4 HOLES
FOR ATTACHING THE MOUNTING
BRACKETS TO THE BED OF THE UTV.
FIG. 8
STEP 8: SEE FIG. 9
BOLT THE MOUNTING BRACKETS
TO THE BED OF THE UTV USING 4 –
5/16" X 1" OR 4 - 5/16" X 1 3/4"
BOLTS, (WHICHEVER LENGTH IS
APPROPRIATE FOR THE UTV) & 4 –
5/16" FENDER WASHERS (ON THE
UNDERSIDE OF CARGO BED), & 4 –
5/16" LOCKNUTS. TIGHTEN
SECURELY.
STEP 5: SEE FIG.6
PLACE FULLY ASSEMBLED RUMBLE SEAT
INTO THE CARGO AREA OF UTV WITH
RUMBLE SEAT BACKREST AGAINST THE CAB
OF UTV.
**NOTE**THE RUMBLE SEAT IS INTENDED TO
FACE THE REAR OF THE UTV WITH
BACKREST AS CLOSE TO THE ROLL BARS AS
POSSIBLE.
STEP 7: SEE FIG. 8
REMOVE RUMBLE SEAT & DRILL
THE 4 MARKED LOCATIONS IN THE
BED OF THE UTV USING A 7/16"
DRILL BIT. **NOTE**BE SURE YOU
ARE NOT DRILLING INTO FUEL
TANK OR FUEL LINES.
PAGE 3 OF 4
FIG. 7
FIG. 9