Active Silicon AS-CIB-3GSDI-002-EVAL-B 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} Active Silicon AS-CIB-3GSDI-002-EVAL-B에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Active Silicon AS-CIB-3GSDI-002-EVAL-B 10 페이지. Evaluation kit for harrier af-zoom sdi cameras
Active Silicon AS-CIB-3GSDI-002-EVAL-B에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
Figure 9. Windows 10
Command prompt application
Run the HarrierControl application executable.
You should see something similar to the display shown in figure 10.
Once the application is running you can follow the screen prompts to change settings or query the
camera settings.
The HarrierControl application can be used with command line arguments as follows:
HarrierControl [P1] [P2] [P3] [P4]
Argument [P1]:
This specifies the type of Interface/Serial communication to be used.
/?
displays help text.
/h
displays help text.
/H
displays help text.
RS232 RS-232 comms via Harrier Evaluation Kit Board selected.
RS485 RS-485 comms via Harrier Evaluation Kit Board selected.
TTL
TTL comms via Harrier Evaluation Kit Board selected.
USB3
USB comms selected.
COMx
COM port x selected, (x=2-255).
Argument [P2]:
This specifies the Baud Rate of the serial port. Valid values are 9600, 19200, 38400, 57600 and
115200.
With USB3 communications [P2] is not required and is omitted from the command line.
March 2022
HARRIER AF-ZOOM SDI CAMERAS
Figure 10. Typical HarrierControl application start-up text
QUICK START GUIDE
Version 1.0.1 - March 2022
Page 7 of 10