Active Silicon AS-CIB-3GSDI-002-EVAL-B Посібник із швидкого старту - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Аксесуари для фотоапаратів Active Silicon AS-CIB-3GSDI-002-EVAL-B. Active Silicon AS-CIB-3GSDI-002-EVAL-B 10 сторінок. Evaluation kit for harrier af-zoom sdi cameras
Також для Active Silicon AS-CIB-3GSDI-002-EVAL-B: Посібник із швидкого старту (8 сторінок)
Друкувати сторінку
Figure 9. Windows 10
Command prompt application
Run the HarrierControl application executable.
You should see something similar to the display shown in figure 10.
Once the application is running you can follow the screen prompts to change settings or query the
camera settings.
The HarrierControl application can be used with command line arguments as follows:
HarrierControl [P1] [P2] [P3] [P4]
Argument [P1]:
This specifies the type of Interface/Serial communication to be used.
/?
displays help text.
/h
displays help text.
/H
displays help text.
RS232 RS-232 comms via Harrier Evaluation Kit Board selected.
RS485 RS-485 comms via Harrier Evaluation Kit Board selected.
TTL
TTL comms via Harrier Evaluation Kit Board selected.
USB3
USB comms selected.
COMx
COM port x selected, (x=2-255).
Argument [P2]:
This specifies the Baud Rate of the serial port. Valid values are 9600, 19200, 38400, 57600 and
115200.
With USB3 communications [P2] is not required and is omitted from the command line.
March 2022
HARRIER AF-ZOOM SDI CAMERAS
Figure 10. Typical HarrierControl application start-up text
QUICK START GUIDE
Version 1.0.1 - March 2022
Page 7 of 10