Hi-Force ATDP216 사용 설명서 - 페이지 5
{카테고리_이름} Hi-Force ATDP216에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force ATDP216 15 페이지. Air driven hydrotest pumps
Hi-Force ATDP216에 대해서도 마찬가지입니다: 사용 설명서 (9 페이지)
페이지 인쇄
4.2 Work Area Safety
•
Keep work areas clean and well lit. Cluttered spaces and inadequate lighting can result in
unnecessary accidents.
•
Keep bystanders clear of any hydraulic tool activity. Personnel working in close-range should be
made aware of all high-pressure work before commencing.
4.3 Electrical Safety ATEX
•
If the unit is to be used in an ATEX environment it should be adequately earthed to prevent static.
The mounting plate of the pump unit to the frame has been left clean for this purpose.
•
When cleaning the unit, a damp cloth should be used to prevent static build up.
4.4 General Precautions
•
When operating any hydraulic equipment, all operators should ensure that all necessary personal
protective equipment (PPE) is worn, as specified by their employer. Steel toe-cap safety shoes,
safety glasses / visor, and protective gloves should be worn at all times. All relevant risk assessments
should be completed before the use of the equipment.
•
Keep hydraulic equipment away from open flames and direct heat.
•
NEVER handle a pressurised hydraulic hose. Hydraulic fluid escaping under pressure from a
ruptured hose can penetrate the skin and lead to a significant medical emergency, and in some
cases, death. Should this incident occur, seek out medical attention immediately.
•
Seek medical attention immediately if a hydraulic injection injury (no matter how minor) occurs.
•
The system operating pressure MUST NOT exceed the pressure rating of the lowest-rated
component in the system.
•
Only use hydraulic tools / cylinders in a complete and tested, coupled system. NEVER attempt to
use a tool / cylinder that is not correctly coupled to its operational pump. NEVER pressurise
uncoupled male couplers.
•
NEVER attempt to disconnect a hose from a hydraulic system until the system's pressure has been
completely released. Doing so can result in that pressure becoming trapped within the system and
relieving trapped pressure can be dangerous.
•
Loosening a hydraulic fitting under pressure can result in the escape of hydraulic fluid at high
pressure, which can penetrate the skin and cause significant injury or death.
Failure to observe and obey the following safety precautions could result
in property damage, significant personal injury or death;
Operating Instruction Manual:
OM-ATDP-01
5
From Serial Number:
All