Gaggenau CE 261 사용 설명서 - 페이지 8

{카테고리_이름} Gaggenau CE 261에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau CE 261 16 페이지. Glass ceramic cooktop
Gaggenau CE 261에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Setting the cooktop

This section familiarises you with how to make

settings on your cooktop. The table contains cooking

methods and examples for the different heat settings.

Switching the cooktop on and off

The main switch is used to switch the cooktop on and

off.

To switch on: touch the # symbol. A signal sounds.

The lamp above the main switch and the ‹ displays

lights up. The cooktop is ready for use.

To switch off: touch the # symbol until the light above

the main switch goes out. All cooking zones are

switched off. The residual heat indicator remains on

until the cooking zones have cooled down sufficiently.

Notes

‒

The cooktop switches off automatically if all

cooking zones have been switched off for more

than 20 seconds.

‒

The settings remain stored for 5 seconds after the

cooktop has been switched off. If you switch it on

again during this time, the cooktop will operate

using the previously stored settings.

Setting the heat setting

The hob must be switched on with the main switch.

Each cooking zone has 9 heat settings.

Heat setting 1 = lowest output

Heat setting 9 = highest output

Select the cooking zone by touching the

respective symbol in the display panel.

Select the required heat setting within 5 seconds.

The selected heat setting lights up in the heat setting

display. A signal sounds to confirm the setting after a

few seconds.

Changing the heat setting

Select the cooking zone and set the required heat

setting.

Switching off the cooking zone

Select the cooking zone and set to 0. The cooking

zone switches off. The residual heat indicator appears

after approx. 5 seconds.