Great Lakes SR Series 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Great Lakes SR Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Lakes SR Series 12 페이지. 19" eia wall mount swing rack
Great Lakes SR Series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (8 페이지)

페이지 인쇄

MOUNTING INSTRUCTIONS

Wood Studded Wall

Once the location on the wall has been determined, inspect the wall surface.

The wall must be flat and square in the horizontal and vertical plane to ensure

the Swing Rack closes correctly. If the wall is not flat and square, you might be

required to use shims.

Wood studded wall mounting instructions apply to a 2" x 4" wood stud wall

with 3/4" plywood.

SR recommended Mounting Hardware for Wood Studded Wall

ALL SIZES

SRD recommended Mounting Hardware for Wood Studded Wall

GL24SRD

Qty (4) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer

GL36SRD

Qty (8) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer

GL48SRD

Qty (8) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer

Masonry Wall Surface

For masonry wall surface, the installer must provide all the appropriate

hardware.

INSTALLATION

Loading Equipment

WARNING: Only install equipment after the Swing Rack has been properly

secured. Do not move the Swing Rack assembly while loaded.

To maintain uniform distribution of the mechanical load in the Swing Rack,

load the heaviest equipment first, at the bottom of the Swing Rack and load

the lighter units at the top.

Maximum load capacity is as follows:

PART NO.

GL24SR

GL36SR

GL48SR

GL24SRD

GL36SRD

GL48SRD

Qty (4) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer

24.512"

20.562"

36.763"

20.562"

48.763"

20.562"

24.12"

20.62"

36.37"

20.62"

49.62"

20.62"

18.00"

24.00"

RMU

WEIGHT CAP.

100