Great Lakes SR Series 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Great Lakes SR Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Lakes SR Series 12 페이지. 19" eia wall mount swing rack
Great Lakes SR Series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (8 페이지)

페이지 인쇄

STEP 1

Place the back brace onto the four threaded studs on the two side brace

assemblies. Secure with four #10-32 acorn nuts. Tighten with 3/8" nut driver.

Install the top brace to the outside of the two side brace assemblies with four

#10-32 x 1/4" Phillips Pan Head screws, but do not tighten screws; install the

bottom brace in the same manner. The large formed edge of the top/bottom

braces mount towards the rear and the inside of the swing rack.

Top/Bottom

Brace (qty. 2)

Side Brace Assembly

(qty. 2)

#10-32 x 1/4" Phil

Pan Head Screw

(4 locations on bottom)

Rear Brace (qty. 1)

#10-32 x 1/4" Phil

Pan Head Screw

(4 locations on top)

#10-32

Acorn nut

(4 locations)

Top/Bottom

Brace