Great Lakes SR Series Kurulum Talimatları Kılavuzu - Sayfa 5
Raflar ve Standlar Great Lakes SR Series için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Great Lakes SR Series 12 sayfaları. 19" eia wall mount swing rack
Ayrıca Great Lakes SR Series için: Kurulum Talimatları Kılavuzu (8 sayfalar)
Sayfayı Yazdır
STEP 1
Place the back brace onto the four threaded studs on the two side brace
assemblies. Secure with four #10-32 acorn nuts. Tighten with 3/8" nut driver.
Install the top brace to the outside of the two side brace assemblies with four
#10-32 x 1/4" Phillips Pan Head screws, but do not tighten screws; install the
bottom brace in the same manner. The large formed edge of the top/bottom
braces mount towards the rear and the inside of the swing rack.
Top/Bottom
Brace (qty. 2)
Side Brace Assembly
(qty. 2)
#10-32 x 1/4" Phil
Pan Head Screw
(4 locations on bottom)
Rear Brace (qty. 1)
#10-32 x 1/4" Phil
Pan Head Screw
(4 locations on top)
#10-32
Acorn nut
(4 locations)
Top/Bottom
Brace
5