6KU FIXIE 단계별 구축 매뉴얼 - 페이지 14
{카테고리_이름} 6KU FIXIE에 대한 단계별 구축 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 6KU FIXIE 17 페이지.
페이지 인쇄
- 1. Table of Contents
- 2. Tools
- 3. Let's Get Started
- 4. Installing the Handlebar
- 5. Installing the Front Wheel
- 6. Aligning the Stem
- 7. Installing the Seatpost
- 8. Optimizing the Brake Pads
- 9. Preparing Pedals for Installation
- 10. Installing the Pedals
- 11. Pumping the Tires
- 12. Let's Finish up that Handlebar
- 13. Optional Fixed Gear/Freewheel
- 14. Contact Information
OPTIONAL
FIXED GEAR/FREEWHEEL
a.
You'll need two optional tools that
aren't pictured in this Build Guide: a
chain whip
and a
lockring tool.
b.
Remove your rear wheel from the
bike.
c.
The side of the rear hub with the
fixed cog/lockring has two separate
sets of threads on it - the first, closest
to the middle of the hub, has right-
(i.e. "normal")
hand
thread and
accepts the fixed cog. The second,
closest to the outside of the hub, has
left-hand
(i.e. "reverse")
accepts a lockring. The lockring stops
the cog from threading off when you
attempt to skid, pedal backwards, etc.
d.
Use your lockring tool and turn the
lockring clockwise to remove it. Set
aside.
13
thread and