Great Lakes GL300E-2432 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Great Lakes GL300E-2432에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Lakes GL300E-2432 13 페이지. Equipment cabinet/rack

INSTALLATION

Receiving, Unpacking, and Removing the E cabinet from the Pallet

Inspect and report any damage before receiving. Unpack the cabinet

by carefully removing the corrugated carton and corners. Avoid

damaging the cabinet when removing packaging.

WARNING: Only trained service personnel should be used to remove

the cabinet from the pallet. Also, be sure you have a sufficient number

of service personnel. Do not attempt to move cabinets by yourself.

WARNING: Be careful when moving cabinets before installation.

Sudden stops and starts, excessive force, obstructed routes, and

uneven floor surfaces may cause the cabinet to topple over.

Loading Equipment

WARNING: Only install equipment after the E cabinet has been

properly secured. Do not move the E cabinet assembly while loaded.

Once in place at the desired/intended location, deploy the leveling feet

for maximum stability.

Rated or maximum load capacity for the GL300E is 300 lbs. and the

maximum load capacity for the GL480E and GL600E is 600 lbs.

To maintain a uniform distribution of the mechanical load in the

E cabinet, load the heaviest equipment first, at the bottom of the

E cabinet and load the lighter units at the top.