Gaggenau VG 414 210 AU 사용 설명서 - 페이지 7

{카테고리_이름} Gaggenau VG 414 210 AU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VG 414 210 AU 16 페이지. Gas wok
Gaggenau VG 414 210 AU에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지)

페이지 인쇄

Burner assembly

Always assemble the burner parts correctly and evenly

to avoid faults during ignition or during use. When

assembling the burner parts, make sure that the

burner head is placed on the base in such a way that

the electrode is positioned in the opening on the

burner head. The catching pin on the burner ring must

fit in the corresponding groove on the burner head.

Wok burner assembly

Operation

The markings show the position of the corresponding

burner and the setting between high and low heat. The

flame setting is infinitely variable between high and

low heat.

Notes

‒

Only light a burner if all pan supports and burner

parts are properly assembled.

‒

Make sure the burners and electrodes are clean

and dry.

‒

Only use the recommended accessories. Do not

cover the stainless steel cooktop base (e.g. with

aluminium foil).

‒

Do not cover the air inlet at the back of the

cooktop.

Abnormal operation

Flames are usually blue and sharply defined. If the

flames are yellowish or noisy or if the gas does not

ignite within the period specified under "switching on"

abnormal operation is indicated. Refer to chapter

"After-sales service" of this manual for service contact

details.

Caution! Heat damage to the extractor hood: Always

switch on the extractor hood while the gas cooktop is

in use. When using several cooking positions select a

higher fan level on the extractor hood. Make sure there

is a sufficient ventilation of the room.

Switching on

Your cooktop features automatic fast ignition.

Place a suitable pot or pan on the pan support.

Press down the control knob and turn it

anticlockwise to the required position. The burner

lights automatically.

The flame size can be set continuously between high

and low by slowly turning the control knob.

Notes

‒

When using large pots or pans you should ignite

the burner in the low position.

‒

Every time the gas hob is switched on, the

electronics run an auto test. The electrode fires

and the burner ignites after a few seconds.