Hi-Link HLK-LD2410 사용자 설명서 - 페이지 13

{카테고리_이름} Hi-Link HLK-LD2410에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Link HLK-LD2410 15 페이지. Human presence sensing module

Shenzhen Hi-Link ELectronics Co.,Ltd

7.Radome Design Guideline

• Radar waves are reflected on the radome boundary

• Losses in total radar radiated or received power

• The reflected wave enters the receiving channel, affecting the isolation between the

transmitting and receiving channels

• Reflections may degrade the standing wave of the antenna, further affecting the antenna gain

• Radar waves will suffer loss when propagated in the medium. In theory, the higher the

frequency, the greater the loss will be

• Electromagnetic waves undergo a certain degree of refraction as they pass through a medium

• Affects the antenna's radiation pattern, which in turn affects the sensor's coverage

•Structural shape of the radome

•The surface is smooth and flat, and the thickness is uniform. Such as plane or spherical

surface, can not be uneven.

•If there is a surface coating, it must not contain metals or conductive materials.

•Directly above the antenna, the radome is parallel to the antenna plane.

•Height H from the antenna to the inner surface of the radome

•The ideal height is an integer multiple of the half wavelength of the electromagnetic wave in

the air.

•

,where m is a positive integer, co is the speed of light in vacuum, and f is the

working center frequency.

•For example, the center frequency of 24.125GHz, its half wavelength in air is about 6.2mm.

• Radome thickness D

•The ideal thickness is an integer multiple of the half wavelength of the electromagnetic wave

in the medium.

material.

•For example, a certain ABS material

HLK-LD2410

,where m is a positive integer and

is the relative permittivity of the radome

=2.5, its half wavelength is about 3.92mm.

User Manual