Hi-Link HLK-B30 사용자 설명서 - 페이지 8

{카테고리_이름} Hi-Link HLK-B30에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Link HLK-B30 14 페이지. 802.11n+ble 4.2 wireless module

4. Test board description

The test board is mainly used to demonstrate the functions of the HLK-B30 module's lanterns,

sockets and lights. Use the test board to demonstrate remote switch LEDs, color changes, brightness

changes, relay switch lights, etc.

Before testing the switch light function, you need to use the serial port to burn the firmware of the

switch light function. The function of the switch lamp mainly realizes the on and off function of the

LED_Y lamp. The function of turning on or off the LED_Y lamp can be controlled by the switch button.

Power off the on the module six times continuously at a time interval of one second, and then waited 6

seconds, the NET led light will flash once every second, indicating that the module has erased the network

configuration information and entered the distribution network. After the network configuration is

successful, the NET led light will be on constantly, indicating that the router is successfully connected.

HLK-B30

Shenzhen Hi-Link Electronic Co., Ltd.

Figure 3

HLK-B30 Module test board

Manual

6/10