Great Little Trading Alba L4472 매뉴얼 - 페이지 11

{카테고리_이름} Great Little Trading Alba L4472에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Alba L4472 11 페이지. Corner base unit & top shelf

x12

STEP 14:

IMPORTANT! Before the back panels are secured, please insert 2x cam locks (#3)

into the remaining holes on panel N. Turn clockwise to lock.

Take back panel P and align with the drill holes in the grooved edges of panels I & K.

Note the the positioning of panel P. At one end the drill holes are set further into

the panel. This end need to be at the corner join.

Secure with 12x domed head screws (#4).

Take back panel O and align with the drill holes

in the grooved edges of panels J & L.

Again, the holes on the panel that are set further

in should be at the corner join.

Secure with 12x domed head screws (#4).

x12

Hardware for Step 15:

2x #3 Cam Locks

24x #4 Domed Head

Screws

STEP 15:

Your Alba Corner Base Unit and Top Shelf are now fully built and ready to use with

an Alba CORNER Shelf unit.

Before you use your units, we strongly advise that you attach the anti-tip kit

(included) to the top shelf to secure this product to the wall.

Please use the pilot holes on the back edge of the top shelf (highlighted) to attach

the anti-tip brackets using the hardware included with the kit.

Please refer to the instructions in the kit

provided for further guidance.

Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

Hardware for Step 16:

1x #6 Anti-Tip Kit