Great Little Trading Alba L4472 매뉴얼 - 페이지 9

{카테고리_이름} Great Little Trading Alba L4472에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Alba L4472 11 페이지. Corner base unit & top shelf

STEP 10:

Insert 4x cam dowels (#1) into BOTH of the

base unit side panels G & H.

Hardware for Step 10:

8x #1 Cam Dowels

Hardware for Step 11:

8x #2 Wooden Dowels

2x #3 Cam Locks

BASE

STEP 11:

Take the K/L base panel and

insert 4x wooden dowels into the

remaining holes in the corner.

Position back support panel N first,

it needs to be flat on the floor. The

large drill holes on the panel to be

facing the floor and the small pilot

holes on the edge MUST be facing

outwards by the corner. Push onto

the the dowels of K/L.

Now take back support panel M and position with the drill holes facing outwards.

Push onto the dowels of K/L and insert 1x cam lock into the hole that can be seen

and turn clockwise to lock.

Take the I/J top panel and insert 4x wooden dowels into the remaining holes in the

corner.

Now push this onto the back support panels N & M.

Insert 1x cam lock in the large hole on panel M and turn clockwise to lock.

NOTE: The cam locks on panel N will be secured at a later stage.

It is important that these

small pilot holes are visible

and in this position on panel

N, as they are needed in a

later step.

TOP