Great Little Trading Alba L4472 매뉴얼 - 페이지 5

{카테고리_이름} Great Little Trading Alba L4472에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Alba L4472 11 페이지. Corner base unit & top shelf

Hardware for Step 1:

2x #2 Wooden Dowels

4x #3 Cam Locks

2x #5

Double Ended

Cam Dowels

STEP 1:

Take top shelf panels A & B and position with large drill holes facing up and the

angled edges next to each other as shown.

Insert 2x wooden dowels (#2) into the inner holes on the angled edge of panel A.

Insert 2x double ended cam dowels into the outer holes on the edge of the same

panel.

Insert 2x cam locks into the large drill holes on the same panel and turn clockwise to

lock.

Pull the ends of cam dowels out a little.

Now push the two panels together and insert 2x cam locks (#3) into the large drill

holes on panel B and turn clockwise to lock.

Using Cam Locks:

When inserting into the panel, ensure that each cam lock's

arrow is pointing towards the drill hole on the side edge of

the panel & the dowel that it will be receiving.

When the panels are in the connected position, using a

screwdriver, turn the cam lock in a clockwise direction to

lock and secure.

Hardware for Step 2:

7x #1 Cam Dowels

STEP 2:

Using a Phillips screwdriver, prepare the top shelf side panels by inserting 3x cam

dowels (#1) into the smaller holes of BOTH panels D & C.

Then insert 1x cam dowel (#1) into the end of panel E.