Hi-Link HLK-LD1115H-24G 사용자 설명서 - 페이지 9

{카테고리_이름} Hi-Link HLK-LD1115H-24G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Link HLK-LD1115H-24G 17 페이지. Human presence sensor radar

Enter an integer greater than 1 in



When the upper computer does not receive any signal longer than the set time, the upper

computer displays

Click

the setting



appear. The Sensitivity drop-down menu can select 1-30, 1 is the default sensitivity setting,

and each increase by 1 increases the sensitivity threshold th1/th2 by 10%. The module does

not support flash

Parameters such as sensitivity need to be reconfigured after power failure.

the window

will also display the output signal of the module's serial port.

Note: When performing the setting operation of each window in the upper computer, you need to

click the button to close the serial port of the upper computer. After setting, click to open the

serial port.

Toggle Unattended

the unmanned

state.

Unmanned

interface, and the

sensitivity setting

save

temporarily, and the save button of the host computer can be ignored.

Window, the window unit is seconds.

and

saving parameters window

The right side of

will