Hi-Link HLK-LD1115H-24G Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Hi-Link HLK-LD1115H-24G. Hi-Link HLK-LD1115H-24G 17 pagina's. Human presence sensor radar

Pagina afdrukken
Enter an integer greater than 1 in
When the upper computer does not receive any signal longer than the set time, the upper
computer displays
Click
the setting
appear. The Sensitivity drop-down menu can select 1-30, 1 is the default sensitivity setting,
and each increase by 1 increases the sensitivity threshold th1/th2 by 10%. The module does
not support flash
Parameters such as sensitivity need to be reconfigured after power failure.
the window
will also display the output signal of the module's serial port.
Note: When performing the setting operation of each window in the upper computer, you need to
click the button to close the serial port of the upper computer. After setting, click to open the
serial port.
9
Toggle Unattended
the unmanned
state.
Unmanned
interface, and the
sensitivity setting
save
temporarily, and the save button of the host computer can be ignored.
Window, the window unit is seconds.
and
saving parameters window
The right side of
will