Great Little Trading Hamilton L5131 매뉴얼 - 페이지 8

{카테고리_이름} Great Little Trading Hamilton L5131에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Hamilton L5131 10 페이지.

STEP 9:

Take back upstand H and insert 2x cam dowels

(#1) to the two holes on the long flat side.

Place panel H into the holes of the back legs.

When in place, insert 2x cam locks (#5) into

the large holes on the back of the leg and turn

clockwise to secure.

The desk frame is ready.

Hardware for Step 9:

2x #1 Cam Dowels

2x #5 Cam Locks

STEP 10: Create the drawers

Take 2x panel J and 2x panel I and orientate with the

groove and holes facing up. Insert 1x cam dowel (#1)

into the central hole of EACH panel as shown.

Take one of each panel I & J and insert 2x wooden

dowels (#4) into the holes either side of the metal

dowel. Connect panel K to panel J. Ensure the

grooves on the inside of the drawer are aligned on all

panels. When connected, insert 1x cam lock (#5) into

the large drill hole on the back of panel K and turn

clockwise to lock.

Then connect panel I to panel K, insert the cam lock

and turn clockwise to lock.

Now slide base panel L into the grooves.

Repeat with 2nd drawer box.

Hardware for Step 10:

4x #1 Cam Dowels

8x #4 Wooden Dowels

4x #5 Cam Locks