Great Little Trading Lulworth 매뉴얼 - 페이지 6

{카테고리_이름} Great Little Trading Lulworth에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Lulworth 7 페이지. Chest of drawers
Great Little Trading Lulworth에 대해서도 마찬가지입니다: 매뉴얼 (15 페이지), 매뉴얼 (13 페이지)

페이지 인쇄

STEP 5:

Take top panel (A) and insert 6x cam dowels (#1)

into the drill holes.

Hardware for Step 6:

6x #2 Cam Locks

STEP 6:

Stand the bedside table frame on its feet and position top panel (A) over the

frame as shown. Align the hardware with the drill holes on the edges of the

frame and push into position.

Insert 6x cam locks (#2) into the large holes on the panels on the inside of

the bedside table and turn clockwise to lock.

Hardware for Step 5:

6x #1 Cam Dowels

STEP 7:

Take drawer front panel (H) and insert 4x cam

dowels (#1) into the drill holes as shown.

STEP 8:

Take drawer side panel (F) and postion L-shaped

runner (#5) onto the edge with the drill holes

present. The runner will fit the full length of the

panel and should be positioned with the wheel at

the end next to the 2 small drill holes as shown.

It should NOT be on the side with the groove.

Ensure the holes are aligned with the drill holes

and fix runner in place with 3x screws (#7).

REPEAT with drawer side panel (G) and L-shaped

runner (#6).

Ensure the screws are fully inserted to allow the

drawer to run smoothly.

Hardware for Step 8:

1x #5 L-Shaped Runner

1x #6 L-Shaped Runner

6x #7 Screws (12mm)

Hardware for Step 7:

4x #1 Cam Dowels

*Note: Ensure the wheel is

aligned with the small drill

holes on the side panels.