Great Little Trading Lulworth Посібник - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник для Внутрішнє оздоблення приміщень Great Little Trading Lulworth. Great Little Trading Lulworth 7 сторінок. Chest of drawers
Також для Great Little Trading Lulworth: Посібник (15 сторінок), Посібник (13 сторінок)
Друкувати сторінку
STEP 5:
Take top panel (A) and insert 6x cam dowels (#1)
into the drill holes.
#1
#1
#1
Hardware for Step 6:
6x #2 Cam Locks
STEP 6:
Stand the bedside table frame on its feet and position top panel (A) over the
frame as shown. Align the hardware with the drill holes on the edges of the
frame and push into position.
Insert 6x cam locks (#2) into the large holes on the panels on the inside of
the bedside table and turn clockwise to lock.
Hardware for Step 5:
6x #1 Cam Dowels
#1
#1
A
#1
A
#2
#2
#2
STEP 7:
Take drawer front panel (H) and insert 4x cam
dowels (#1) into the drill holes as shown.
#1
#1
STEP 8:
Take drawer side panel (F) and postion L-shaped
runner (#5) onto the edge with the drill holes
present. The runner will fit the full length of the
panel and should be positioned with the wheel at
#2
the end next to the 2 small drill holes as shown.
It should NOT be on the side with the groove.
Ensure the holes are aligned with the drill holes
and fix runner in place with 3x screws (#7).
REPEAT with drawer side panel (G) and L-shaped
runner (#6).
Ensure the screws are fully inserted to allow the
drawer to run smoothly.
Hardware for Step 8:
1x #5 L-Shaped Runner
1x #6 L-Shaped Runner
6
6x #7 Screws (12mm)
Hardware for Step 7:
4x #1 Cam Dowels
H
#1
#1
#5
#7
G
*Note: Ensure the wheel is
aligned with the small drill
holes on the side panels.
#7
#7
#7
F
#7
#7
#6