Great Little Trading Little Wren Cot Top Changer L5119 사용 설명서 - 페이지 6
{카테고리_이름} Great Little Trading Little Wren Cot Top Changer L5119에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Little Wren Cot Top Changer L5119 7 페이지.
페이지 인쇄#7
BOTTOM
hole under the velcro
#6
#9
#4
#7
STEP 7:
Now the unit is built, apply the 2 safety straps (#6).
There is one for the centre of each end of the unit and EACH strap is applied
with 1x flat washer (#9) and 1x wood screw (10mm) (#4). See illustration for
positioning.
Next, apply the protective strips (#7 & #8) to the recessed edges of the side
panels. There are 2x long strips (#7) and 2x shorter strips (#8) - please apply to
the correctly sized edges. These will protect the top edges of your cot bed when
using the changing unit.
Hardware for Step 7:
2x #4 Wood Screws (10mm)
2x #6 Safety Straps
2x #7 Long Protective Strips (160mm)
2x #8 Short Protective Strips (80mm)
2x #9 Flat Washers (10mm)
E
#8
C
#6
#9
#4
TOP
#8
STEP 8:
Before each use, place the changer on the top of the cot or cot bed in a central
position and attach using the safety straps (#6) as shown below. The safety straps
should be tightly attached around the top rail and the hook & loop tapes should
be over-lapping to secure.
DO NOT use the changer close to one end or the other as this may provide gaps
which can trap and injure little limbs.
Your product is now ready to use.
6