Great Little Trading Little Wren Cot Top Changer L5119 Kullanım Kılavuzu - Sayfa 6

Bebek & Yürümeye Başlayan Çocuk Mobilyaları Great Little Trading Little Wren Cot Top Changer L5119 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Great Little Trading Little Wren Cot Top Changer L5119 7 sayfaları.

Sayfayı Yazdır

BOTTOM

hole under the velcro

STEP 7:

Now the unit is built, apply the 2 safety straps (#6).

There is one for the centre of each end of the unit and EACH strap is applied

with 1x flat washer (#9) and 1x wood screw (10mm) (#4). See illustration for

positioning.

Next, apply the protective strips (#7 & #8) to the recessed edges of the side

panels. There are 2x long strips (#7) and 2x shorter strips (#8) - please apply to

the correctly sized edges. These will protect the top edges of your cot bed when

using the changing unit.

Hardware for Step 7:

2x #4 Wood Screws (10mm)

2x #6 Safety Straps

2x #7 Long Protective Strips (160mm)

2x #8 Short Protective Strips (80mm)

2x #9 Flat Washers (10mm)

TOP

STEP 8:

Before each use, place the changer on the top of the cot or cot bed in a central

position and attach using the safety straps (#6) as shown below. The safety straps

should be tightly attached around the top rail and the hook & loop tapes should

be over-lapping to secure.

DO NOT use the changer close to one end or the other as this may provide gaps

which can trap and injure little limbs.

Your product is now ready to use.