Hi-Power Cycles HPC REVOLUTION 2017 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Hi-Power Cycles HPC REVOLUTION 2017에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Power Cycles HPC REVOLUTION 2017 20 페이지.

1.4 Next, install the handlebars. Your stem is already installed on the Revolution. Just use the four allen

screws to tighten the handlebar in place. Your brakes should be angled downward at around 45 degrees, so

they are comfortable to grab while you are in your standard riding position.

1.5 Attach seat into seat post and tighten to desired position via quick release on the bottom of the seat tube.

IMPOTANT: MAKE SURE THE SEATPOST DOES NOT PROTRUDE PAST THE FRAME'S

SEATPOST TUBE! Otherwise, your rear shock could come into contact with the seat tube and cause damage

to the shock and/or the tube.

*Note: Some models with front forks will be shipped with minimal air in the front and or rear

fork. YOU MUST PUT PROPER AMOUNT OF AIR IN FRONT and REAR Air Suspension

PRIOR TO RIDING! This applies to Revolution X owners with BoXXer World Cup and Vivid

R2C Air suspension, or those who have requested air suspension on the front or rear.