DAYCO D165DC 운영자 매뉴얼 - 페이지 6

{카테고리_이름} DAYCO D165DC에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAYCO D165DC 19 페이지.

HOSE PREPARATION

Dayco recommends that all users familiarize themselves with Dayco's warning

statements, SAE J1273, and the Kwikrimp® concept, found in this operator's manual.

Select the Dayco hose and coupling to be assembled.

Determine the correct crimp

setting from the crimp specifications

sheet.

Determine hose cut length

by subtracting the cutoff factor for

each coupling from the overall

length of the assembly. For these

cutoff factors, see Dayco's

published catalog data.

Cut the hose square and to the proper length with a suitable saw.

Coat the coupling stem with Dayco hose assembly lubricant (HAL16) to ease hose

insertion. Insert the hose until it "bottoms" in the coupling shell.

To insure that the hose is bottomed in the collar, mark the insertion depth on the hose

before inserting it into the coupling (see figure below).

Using a clockwise twisting motion or fixing the hex on the coupling in a vise may help when

tolerances are tight.

Page