DYNACO SCA-80 매뉴얼 - 페이지 8

{카테고리_이름} DYNACO SCA-80에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNACO SCA-80 12 페이지. C9 replacement
DYNACO SCA-80에 대해서도 마찬가지입니다: 조립 설명서 (15 페이지)

c. Wire 3 – green wire from the left amplifier channel to the other end of the

positive harness. If this wire is too short to reach, extend it with a bit of the

supplied red wire, and use heat shrink tubing to cover the joint. See

Appendix 1 for details.

4. Reconnect the ground wire, Wire 4 in Figure 6.

5. Inspect your work carefully. Make sure that there is no possible way for wires

connected to the positive and negative terminals of the new C9 configuration to

come into contact.

Page 8 of 12