DYNACO SCA-80 Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} DYNACO SCA-80. DYNACO SCA-80 12 pagina's. C9 replacement
Ook voor DYNACO SCA-80: Montagehandleiding (15 pagina's)

Pagina afdrukken
DYNACO SCA-80 Handmatig
c. Wire 3 – green wire from the left amplifier channel to the other end of the
positive harness. If this wire is too short to reach, extend it with a bit of the
supplied red wire, and use heat shrink tubing to cover the joint. See
Appendix 1 for details.
4. Reconnect the ground wire, Wire 4 in Figure 6.
5. Inspect your work carefully. Make sure that there is no possible way for wires
connected to the positive and negative terminals of the new C9 configuration to
come into contact.
Page 8 of 12