DYNACO Stereo 410 설치 매뉴얼 - 페이지 8
{카테고리_이름} DYNACO Stereo 410에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNACO Stereo 410 12 페이지. Replacement rca jack
페이지 인쇄Figure 6-Remove two screws from the side, behind the fan
Remove two side screws, on the non-fan side of the chassis.
Figure 7-Remove two side screws (non-fan side)
Turn the Stereo 400 on its side, with the transformer side on the table to get access to and
remove 9 screws on the bottom. Once again, labeling these screws and the lock-washers
can take some of the guess-work out of reassembly.
Page 8 of 12