DYNACO DYNALOGIX II DY 4000 전기 매뉴얼 - 페이지 7

{카테고리_이름} DYNACO DYNALOGIX II DY 4000에 대한 전기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNACO DYNALOGIX II DY 4000 14 페이지.

페이지 인쇄

DY 4000

Setting Limits

D TXEfiO

1 .

2 .

3 .

4 .

6 .

Press and hold both PROGRAM buttons until display changes to Password.

After display changes, release buttons.

Press and release either red arrow buttons to scroll to 562.

Press the ENTER button. Display will change to: Limit Set.

Press and release the ENTER button to enter limit menu. Display should

change to: ClsLimit.

Press and release either red arrow buttons to scroll to the limit desired to

set or adjust. (Choices: GlsLimit, OpnLimit, Phtlimit and PasLimit)

Press the ENTER button. Display will change to:

JogTo(limitchosen)_Enter.

7. Press the JOG DOWN or JOG UP/RESET button to bring the door down or

up to desired limit position.

8. Press the ENTER button to save desired limit. Display should change to:

(chosen I im it)_Set-OK.

9. Press and release the red arrow buttons to scroll to another limit or exit by

pressing and releasing the MENU button twice. Display will change to

Ready.

Note: Password number will be stored for 4 minute after entering it in. Entering

program mode at this time will not require reentering of password number.

2.2

Optional Dual Height Limit

lf door was not purchased with the dual height option ignore this section

1. Press and hold both PROGRAM buttons until display changes to: Password

After display changes release buttons.

2. Press and release the up red arrow buttons to scroll to 562.

3. Press the ENTER button. Display will change to Limit Set.

4. Press and release the ENTER button to enter limit menu. Display will

change to: GlsLimit.

5. Press the red arrow buttons to scroll through the menu to Paslimits.

6. Press the ENTER button. Display will change to: JogToPas-Enter

7. Press the JOG DOWN or JOG UP button to bring the door down/UP to

desired second height position.

8. Press the ENTER button to save limit setting. Display will change to:

PasLimit_Set-OK.

9. Press and release the MENU button twice and the display changes to Ready.

Note: Password numberwill be stored for 4 minute after entering it in. Entering

program mode at this time will not require reentering of password number.

DYNACO USA, INC,

74e.4,eAd//, hDaan Sd*l/l &Deoey