ADEMCO LYNX 시스템 매뉴얼 - 페이지 2
{카테고리_이름} ADEMCO LYNX에 대한 시스템 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO LYNX 14 페이지.
ADEMCO LYNX에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
Ademco Lynx System Manual
Message playback
The Ademco Lynx is designed to be as maintenance free as possible, however we suggest that you still
test your system once a month and after any alarm occurrences.
Treat the system as you would any other electrical equipment; do not slam protected doors or windows,
keep dust from accumulating on the touchpad and sensors, and do not spray water or any liquid on the
units.
System Keywords
Keyword
Meaning
Alarm
Appears when an intrusion has been detected and the system is armed (also appears
during a fire alarm or audible emergency alarm). Accompanied by the protection zone in
alarm.
Away
All burglary zones, interior and perimeter, are armed.
Instant
Entry delay is turned off.
Stay
Perimeter burglary zones, such as protected windows and doors, are armed.
Fire
Appears when a fire alarm or fire fault is present. Accompanied by a display of the zone
in alarm.
Low BAT.
Low battery condition in a wireless sensor (if zone number is displayed or low system
battery (if no zone number is displayed). If 00 is displayed, a wireless keypad
(5827/5827BD) has a low battery condition.
AC
Appears when AC power is present. If not lit, the system is operating on backup battery
power.
Chime
Appears when the Chime feature is activated.
Test
Appears when the system is in Test mode.
Rec
Appears when in Recording mode.
Message
Appears when a message has been recorded and has not yet been played back.
Bypass
One or more burglary protection zones have been bypassed.
Fault
Appears when a malfunction is discovered in the system at any time; or if any open is
detected in a fire zone at any time; or when a fault in a day/night burglary zone is
discovered during a disarmed period. Accompanied by a display of the zone number in
trouble.
Arm & Disarm the System
Arming
http://alpha.adt.com/help/261[11/14/2018 8:02:22 PM]