ADEMCO LYNX 시스템 매뉴얼 - 페이지 5

{카테고리_이름} ADEMCO LYNX에 대한 시스템 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO LYNX 14 페이지.
ADEMCO LYNX에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 빠른 시작 매뉴얼 (8 페이지)

Ademco Lynx System Manual

zones to be displayed, to be sure that the intended zones are bypassed.

3. Arm the system as usual when the keypad displays the Ready LED on steady.

Door Chime (Entry/Exit Beeps)

To turn the door chime function on or off, press [FUNCTION] and [CHIME].

Panic Alarms

Emergency Keys

Your system may have been programmed to use special keys to manually activate emergency (panic)

functions. To activate a panic function, press and hold down the designated lettered key for at least 2

seconds or press both keys of the designated key pair at the same time.

Function

Silent Alarm

Audible Alarm

Personal Alarm

Fire Alarm

Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key

will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your

attention. Check the specified zone area, close any open doors or windows and enter your security code

and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some

change in the environment of the protected area.

To silence trouble beeps, press any key or enter your security code and press [OFF].

For a complete list of Trouble Conditions, please refer to the

Troubleshooting

http://alpha.adt.com/help/261[11/14/2018 8:02:22 PM]

Signal to Customer Care

Silent alarm

Audible alarm

Emergency alarm

Fire alarm

page

Sound Activated

No audible alarm to indicate

silent alarm has been activated

but message sent to Customer

Care

A loud, steady alarm on touchpad

and any sounders

Steady alarm at touchpad

Pulsing sound at external bells

and sirens

Ademco Lynx & QuickConnect