DynaColor 900 series Hybrid 설정 매뉴얼 - 페이지 8

{카테고리_이름} DynaColor 900 series Hybrid에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DynaColor 900 series Hybrid 11 페이지. Lite h.264 dvr

Connect the DVR via the Remote Software
Setup Requirements:
• Make sure the PC is connected to the Internet.
• Obtain IP address of the Lite H.264 DVR. To check the DVR's IP address, press MENU on the
front panel and select <System Setup>
check the IP.
Changing Internet Setting:
• Start the IE; select <Tools> from the main menu of the browser, then <Internet Options> and
then click the <Security> tab.
• Select <Trusted sites> and click <Sites> to specify its security setting.
• Uncheck "Require server verification (https:) for all sites in this zone". Type the IP address of the
unit in field and click <Add> to add this website to the zone.
• In the Security Level area, click <Custom Level>. Under <ActiveX controls and plug-ins>, set
all items to <Enable> or <Prompt>.
• Click <OK> to accept the settings and close the <Security Settings> screen.
Using the Remote Software:
• Start the IE and enter the IP address of the Lite H.264 DVR in the address bar.
• The ActiveX controls and plug-ins dialog will show twice for confirmation; click <YES> to accept
ActiveX plug-ins. The DVRRemote plug-ins will be downloaded and installed on the PC
automatically when the connection is successfully made.
NOTE: Do not enter any leading "0" characters in the address, for example,
"192.068.080.006" should be entered "192.68.80.6".
NOTE: If the default trigger port 80 is changed into another one, port 81 for example,
then the IP address should be entered as "192.68.80.6:81".
• Version verification starts automatically to verify whether DVRRemote was installed. This
process may take up to 30 seconds.
• When the software is completely downloaded and installed, the Login Screen is displayed.
• Enter the username and password. The default usernames and passwords are admin / 1234
and user / 4321.
8
<Network Setup>
<LAN Setup>
<IP> to