DynaColor 900 series Hybrid Setup Manual - Page 8

Browse online or download pdf Setup Manual for DVR DynaColor 900 series Hybrid. DynaColor 900 series Hybrid 11 pages. Lite h.264 dvr

Print Page

Connect the DVR via the Remote Software

Setup Requirements:

• Make sure the PC is connected to the Internet.

• Obtain IP address of the Lite H.264 DVR. To check the DVR's IP address, press MENU on the

front panel and select <System Setup>

check the IP.

Changing Internet Setting:

• Start the IE; select <Tools> from the main menu of the browser, then <Internet Options> and

then click the <Security> tab.

• Select <Trusted sites> and click <Sites> to specify its security setting.

• Uncheck "Require server verification (https:) for all sites in this zone". Type the IP address of the

unit in field and click <Add> to add this website to the zone.

• In the Security Level area, click <Custom Level>. Under <ActiveX controls and plug-ins>, set

all items to <Enable> or <Prompt>.

• Click <OK> to accept the settings and close the <Security Settings> screen.

Using the Remote Software:

• Start the IE and enter the IP address of the Lite H.264 DVR in the address bar.

• The ActiveX controls and plug-ins dialog will show twice for confirmation; click <YES> to accept

ActiveX plug-ins. The DVRRemote plug-ins will be downloaded and installed on the PC

automatically when the connection is successfully made.

NOTE: Do not enter any leading "0" characters in the address, for example,

"192.068.080.006" should be entered "192.68.80.6".

NOTE: If the default trigger port 80 is changed into another one, port 81 for example,

then the IP address should be entered as "192.68.80.6:81".

• Version verification starts automatically to verify whether DVRRemote was installed. This

process may take up to 30 seconds.

• When the software is completely downloaded and installed, the Login Screen is displayed.

• Enter the username and password. The default usernames and passwords are admin / 1234

and user / 4321.

<IP> to