DynaColor DynaGuard 200 빠른 설치 매뉴얼 - 페이지 4

{카테고리_이름} DynaColor DynaGuard 200에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DynaColor DynaGuard 200 8 페이지.

페이지 인쇄

•

For Non-DHCP user, set the DHCP to <OFF>. You must enter an IP address, Netmask,

Gateway and DNS settings. Please obtain these settings from your network service provider.

•

To change the IP address, Netmask, Gateway and DNS value, press UP/DOWN keys to move

the cursor to the item. Use LEFT/RIGHT keys to access each section of the value and press

ENTER, then change the value using UP/DOWN keys.

•

PPPoE users must set the <PPPoE Account>, <PPPoE Password> and <PPPoE Max Idle>

as well.

•

When the settings are complete, press ENTER to confirm and save the settings, or ESC to

abort.

Connecting Remote PC with the DVR via Modem:

DVR Configuration>>

•

Connect an USB modem to the USB socket and connect a working phone line to the modem.

•

Press MENU and input the Administrator password to access the OSD Main menu. Select

<Network Setup> and then <Dial-in Setup> to set up the Dial-In settings, including Dial-in

Account, Password, Server and Client IP, etc.

PC Configuration>>

•

On your Windows PC, click <Start>, <My Network Places>, <View Network Connections>,

<Create New Connection> to select <Connect using dialup modem> to connect to the

internet through phone line.

•

Enter the phone number of the modem that is connected to the DVR.

•

Enter the Dial-in Account and Password that are specified in local DVR. Click <Finish> to

establish the connection.

Establishing Dial-up Modem Connection from the DVR for Remote Notification:

DVR Configuration>>

•

Connect an USB modem to the USB socket and connect a working phone line to the modem.

•

Press MENU and input the Administrator password to access the OSD Main menu. Select

<Network Setup> and then <Dial-out Setup> to set up the Dial-out settings, including Dial-out

IP, Phone Number, Dial-out Account, etc.

PC Configuration>>

•

On your PC, use the Network Connection Wizard to <Accept incoming connections>.

•

Enter the Dial-out Account and Password that are specified in local DVR.

•

Select network connection type to assign TCP/IP address for the PC. Click <Finish> to

complete the process.

Dome Control

Dome Connection & Settings:

•

See section Connecting Your DVR for RS-485 port pin definition.

•

Refer to the following figure. Connect the R+, R- terminals on the dome camera to the D+, D-