DynaColor DynaGuard 200 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} DynaColor DynaGuard 200에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DynaColor DynaGuard 200 8 페이지.

페이지 인쇄

video. Either press PLAY/STOP again or ESC to return to live video.

NOTE: If there is no available recorded video that matches your specified time and date, the

unit starts to playback from the next available video.

Searching Recorded Video by Event:

•

Press SEARCH button to enter the Search menu.

•

To search event video that was recorded on a specific camera, use LEFT/RIGHT keys to move

the cursor and press ENTER to select or de-select a channel.

•

Move the cursor to <Event List> and press ENTER to list the event video of the selected

channels.

•

The list displays each event by date, time, triggered camera and alarm type. The latest recorded

event video will be listed on the top. To exit the event list, press ESC.

•

Use UP/DOWN to scroll through the Event List. Press ENTER to play back the selected event

record.

NOTE: The event list displays only the first 1024 events; as some events are deleted,

others are displayed.

Playback Controls:

Button

Description

The button is for rewinding the recorded video while playing back. Press the button

LEFT

repeatedly to increase the speed of reverse playback by 1×, 2×, 4×, 8×, 16×, or 32×.

The button is used to play the recorded video fast forward. Press the button

RIGHT

repeatedly to increase the speed of forward playback by 1×, 2×, 4×, 8×, 16×, or 32×.

Press FREEZE to pause the playback video. When the recorded video is paused,

FREEZE

press LEFT / RIGHT to resume playback video single step reverse / forward

respectively. Press FREEZE again to continue playing video.

ESC

Press to exit current mode or stop playing back video and back to live mode.

Using Remote Software

Setup Requirements:

•

Network connection to PC.

•

IP address of your DynaGuard

key on the unit and enter password to access OSD Main menu; select <System Setup>,

<Network Setup>, then <LAN/PPPoE Setup> to check the IP.

Changing Internet Setting:

•

Start the IE; select <Tools> from the main menu of the browser, then <Internet Options> and

then click the <Security> tab.

200 series DVR. To check the DVR's IP address, press MENU