DynaColor DynaGuard 200 빠른 설치 매뉴얼 - 페이지 7

{카테고리_이름} DynaColor DynaGuard 200에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DynaColor DynaGuard 200 8 페이지.

•

Select <Trusted sites> and click <Sites> to specify its security setting.

•

Disable Require server verification (https:) for all sites in this zone. Type the IP address of the

unit in field and click <Add> to add this website to the zone.

•

In the Security Level area, click <Custom Level>. Under <All ActiveX controls and plug-ins>,

set all items to <Enable> or <Prompt>.

•

Click <OK> to accept the settings and close the <Security> screen.

Using the Remote Software:

•

Start the IE and enter the IP address of your DynaGuard

•

The ActiveX controls and plug-ins dialog will show twice for confirmation, click <YES> to accept

ActiveX plug-ins. The DynaRemote

automatically when the connection is successfully made.

NOTE: Do not enter any leading 0 characters in the address, for example,

"192.068.080.006" should be entered "192.68.80.6".

NOTE: If the default trigger port 80 is changed into another one, port 81 for example, you

should enter the IP address as "192.68.80.6:81".

•

Version verification starts automatically to verify whether DynaRemote

process may take up to 30 seconds.

•

When the software is completely downloaded, the Login Screen is displayed.

•

Enter your username and password. The default usernames and passwords are admin: 1234,

user: 4321.

For more information on DynaRemote

Software Upgrade:

•

When a new version of DynaRemote

unit, it will be automatically installed on your PC when you access the unit.

plug-ins will be downloaded and installed on your PC

, see DynaRemote

software is available on your DynaGuard

200 series DVR in the address field.

was installed. This

user's manual.

www.dynacolor.com.tw

200 series