HiB Novum NF02SBTW60 Series 피팅 지침 매뉴얼 - 페이지 7
{카테고리_이름} HiB Novum NF02SBTW60 Series에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiB Novum NF02SBTW60 Series 16 페이지.
페이지 인쇄Plinth Installation
1.
Measure the width and height required, see Fig. 5. HiB recommends installing
plinths 2mm from the floor.
2. If installing a BTW unit, a return piece will need to be cut from the plinth. HiB
recommends a return of 65mm, see Fig. 6.
3. Always double check measurements before cutting. Cut the plinth to size.
4. Measure and mark the carcass leg centres on the back face of the plinth. See
Fig. 7.
5. Fix the brackets to the plinth using the screws provided.
6. If a plinth return is required, fix to the plinth in the appropriate location using
the screws provided.
7. Prior to installing, seal all cut edges using the sealant provided.
8. Secure the plinth to the carcass legs.
hib.co.uk
7