HiB Novum NF02SBTW60 Series 피팅 지침 매뉴얼 - 페이지 9

{카테고리_이름} HiB Novum NF02SBTW60 Series에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiB Novum NF02SBTW60 Series 16 페이지.

Wall Hung Installation

Ensure all components are present before beginning installation.

2. Remove back panels and non-fixed shelves.

3. Plan the unit position on the wall. HiB recommends the installation heights

shown in Fig. 8.

4. Loosely fix the units to the wall using the pre-installed hangers in the

configuration required. Do not secure at this stage.

5. Using a suitably sized spirit level, align the units and secure together using the

predrilled holes and screws provided. See Fig. 11 for hanger adjustment.

6. Secure the units to the wall.

7. Slide the back panel back into position and replace shelves.

8. Measure and cut any end panels and infill panels required, see Fig. 9. Seal all

cut edges, see Fig. 10. HiB recommends positioning the cut edge at the top of

the unit.

Screws and pre-drilled holes in the carcass have been supplied to secure the

To fit the countertop, please refer to the fitting instructions supplied

end panels to the carcass.

with the countertop.

hib.co.uk