GREAT PLANES Extra-300 50 EP 조립 설명서 - 페이지 10

{카테고리_이름} GREAT PLANES Extra-300 50 EP에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES Extra-300 50 EP 16 페이지.

Install the pushrod connectors onto the servo arms as shown. Tighten the nuts just to a snug fit – the

connector must be able to rotate after installation. Use medium CA glue on the nut to keep the

connector from falling off due to vibration.

Note: We recommend the use of Dubro high strength long servo arms.

Mount elevator servo as shown, attach the pushrod to the elevator horn with a 2mm screws, washer,

and nut. Use medium CA glue to lock the nut onto the 2mm bolt to keep the screw from coming loose

due to vibration. Tighten the pushrod connector with a 1.5mm hex wrench.